The system allows to tolerate the following dimensional errors: Floor level and ceiling errors: +/- 3/16". Slab deflection after installation: +/-3/16".


Aluminum profiles can be treated either with anodic coating and anodizing.


All accessories have been developed and designed in order to be integrated into the system and are in compliance with the standards for prolonged use over the years, both for mechanical reasons and for prolonged contact surfaces. The surface finishes can match the color of the profiles.


The glass, panels and doors gaskets are in transparent color silicone to be elegant and less visible as possible and not to impact the eye. The acoustic gaskets located under the base profile are mono-adhesive and foam. The brushes on the sliding doors are of prime quality 'high density' in light gray color in compliance with ASTM standards ASTM C 864, C 509, C 1115, E 2203.


The system can accommodate two different glass thicknesses: laminated glass A" + A" with double PVB or 1/4 + 1-4" with double PVB. The doors glass is 25/64" thick tempered glass or higher in relation to the size. Different types of soundproofing panels can be accommodated, for acoustic control, with different finishes in stone, wood, abs. Etc. (See cladding optionals) up to the maximum size of 1 3/8 ".


The installation of ELI partition wall, is an easy and fast procedure. Floor and ceiling surveys are needed to check the tolerances of the built situation, and can be easily done with laser instruments. Glass and infill panels are leveled inside the lower aluminum profiles with PVC plates with different thickness.