Stationary Sightproof Impact

COMP-5LS is a Florida Product Approved extruded aluminum sightproof stationary louver system designed to protect air intake and exhaust openings in building’s exterior walls. System is tested and qualified per Florida test protocols: TAS 201 (Large Missile Impact), TAS 202 (Loads) and TAS 203 (Cyclic Wind Loading).

Designed and tested to comply with the requirements of the 6th Edition Florida Building Code (2017) including High Velocity Hurricane Zone (HVHZ). Louver system shall only be installed in a location where the room behind the louver is designed to drain water penetrating into the room, and the room will house water resistant/waterproof equipment, components or supplies.

Designed for the USA market

Hurricane Resistant Hurricane Resistant

System Description

Frame: 5” Depth, 6063-T6 extruded aluminum, .081” nominal wall thickness Blades: 6063-T6 extruded aluminum, .081” nominal wall thickness. Double Drainable, sight-proof blades spaced 2” on center. Construction: Mechanically fastened Finish: Mill Minimum Louver Size: 12” W x 12” H Maximum Louver Size: 120” W x 60” H or 120” H x 60” W (Single Section) Blade Brace Angle: Depending on wind load, louver size or other special requirements, louvers will have rear mounted blade brace angles, which increases overall depth of louver. Max Design Pressure: 150 PSF


Hurricane Resistant Stainless Steel Hardware Available in Blank-Off Panels (Standard or Insulated) Assortment of bird and insect screens in removable frame (inside mounted, rear) Architectural finishes in Anodized and PPG Duranar 2-Coat Finish available